[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Roof Shading

   In my building model,there is shading for roof.For the configuration 
of the roof in e+,the roof has been divided to several parts.The shading
divice cover more than one parts.I define the roof shading as 
surface:shading:attached.Its Base Surface Name is one of the coverd 
   I simulate and it completed successful.But when i compare the 
results between the models which has roof shading and has no roof 
shading,i found the results have no changes at all.It puzzled me.
   Is it impossible to add a shading to the roof?

  thanks for your help.

------------------------ Yahoo! Groups Sponsor --------------------~--> 
Most low income households are not online. Help bridge the digital divide today!

The primary EnergyPlus web site is found at:

The group web site is:

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to: