[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] convection coefficients for vapour transfer



Hi to all.

I have two questions: 
1) Is it possible to give an initial temperature and relative humidity 
to the indoor air and the constructions before starting the simulation? 
2) By calculating the moisture exchange with the construction 
(EMPDmodel or MTFmodel)can EP also take the internal and external 
surface resistance for vapour transfer (Zsi and Zse) into account? I 
saw for the heat transfer convection coefficients that EP calculates 
them hisself unless you explicitely give them values in EP. Does the 
same happens to the convection coefficients for vapour transfer? 

Thanks again for your good help !

Kind regards, Marijke Steeman





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Fair play? Video games influencing politics. Click and talk back!
http://us.click.yahoo.com/T8sf5C/tzNLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/