[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Zone multipliers in combination with 'low temp radiant system:hydronic'?
Mike, Linda,
is it possible to use zone multipliers in combination with a 'low temp
radiant system:hydronic' system?
I know that the zone multiplier multiplies the zone loads but do not
upsize the zone equipment.
How should I change a 'low temp radiant system:hydronic' system?
Can I change the water flow rate?
This would yield to a extreme large flow velocity (tubing inside
diameter=const), and furthermore also influence the heat exchange
rate!
But even if I increase the flow rate: the surface area, the water and
zone temperature are about the same, so we can't transfer more heat in
the zone! Or is this handled by E+ automatically?
Christian
------------------------ Yahoo! Groups Sponsor --------------------~-->
Most low income households are not online. Help bridge the digital divide today!
http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~->
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/