Re: [EnergyPlus_Support] Problem about CP values

[Linda Lawrie <linda@xxxxxxxxxx>]

Did you remove the "Report, ComisInput" statement from one run to the next?

The .cif file is only built once per run.  All the inputs are 
actually passed internally and the .cif file is only a snapshot.

At 04:39 PM 12/15/2005, michelematos_ecv wrote:

>I have a problem about the CP values (using COMIS air flow model).
>When I change the model plan area density and expoent of wind velocity
>profile, on COMIS SITE WIND CONDITIONS, the CP values in the *.cif
>file are not updated...
>Does anyone have the same problem? or I am missing something...

Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/