[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] IDF<-->DXF converter -two ways?

Dear all,

Has it been considered to incorporate a utility that performs a two-
way DXF conversion into EnergyPlus? Up to now, it is IDF to DXF, but 
what are the possibilities of adding the opposite direction? (Just as 
there is now a weather converter, why not DXF?)

Of course, the responsibility of entering correct "face" directions 
and entities as well as assigning their construction, would fall on 
the user and/or E+ developer.

Regards,








The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/