[EnergyPlus_Support] heat exchanger:air to air:flat plate

["crossrainbow_he" <crossrainbow_he@xxxxxxxxx>]

dear all:
     I simulate a building with the fan coil unit:4pipe.Because I want 
to get the result about the heat exchanger.so I report the outside air 
inlet node temperature ,the outside air outlet temperature,the 
secondary air inlet node,the secondary air outlet node.
    But ,I got the wrong number.
    These are the results:
    supply air inlet node temperature:28.3	
    supply air outlet node temperature:26.5
    secondary air inlet node temperature:26.5
    secondary air outlet node temperature:28.3






The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/