Re: [EnergyPlus_Support] Exporting/importing data

[Linda Lawrie <linda@xxxxxxxxxx>]

Are you using the BLAST translator?  If so, I can probably give you some hints.

Yes, the latest IDFEditor will let you open another IDF and copy from it.

At 08:04 AM 5/2/2006, aboyemeplus wrote:

>I have been converting BLAST models into IDFs but was unable to retain
>the intended surface coordinates. Typically, the x and y coordinates
>will be offset by a constant amount after the translation.

Linda

EnergyPlus WebSite: http://www.energyplus.gov
Owner: EnergyPlus_Support list
Member: EnergyPlus Development Team



[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/