[EnergyPlus_Support] Re: Fan Coil and auxilary air

["mjwitte" <mjwitte@xxxxxxxx>]

Yes, that should work.  Be sure to set the heating and cooling
priority of the fan coil unit to be 2 so that it runs after the air
from the air loop has been supplied in case that air changes the net load.

Mike



--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Elmer Morrissey"
<elmofuddly@...> wrote:
>
> Hi all,
> 
> Quick question: is it possible configure a primary air loop which
> supplements a set amount of auxillary air AND have a Fan Coil unit
> provide the additional tempering of the zone conditions?
> 
> When I do run a simulation (configured as outlined above), I retrieve
> very strange warnings which include 'zone temperature out of
bounds', etc.
> 
> Kind regards
> 
> -Elmer
>







------------------------ Yahoo! Groups Sponsor --------------------~--> 
Everything you need is one click away.  Make Yahoo! your home page now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~-> 

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/