[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Error message
The only other thing I can think of is the sub-surface must be in the
same plane as the parent surface. Paste your surface and sub-surface
objects into an email and I'll see if something stands out.
Clarice Bleil de Souza wrote:
> Hi Richard,
>
> Thanks for the reply. I've checked the coordenates and they are not
> the same. I have an external wall with 2 opaque doors inserted on it
> and I keep getting the same error message. The door coordenates are
> inside the wall surface: 100mm up from the floor, and in the x and y
> axis they are much smaller than the parent surface. I really don't
> know what is going on. Could it be sth else?
>
> Again I revised the file but there seem to be nothing wrong with it :(
> Do you have any other tip?
>
> Regards,
>
> Clarice
>
>
> Richard Raustad <RRaustad@xxxxxxxxxxxx
> <mailto:RRaustad%40FSEC.UCF.EDU>> escreveu:
> Clarice, are the sub-surface coordinates the same as the surface
> coordinates? If so, slightly reduce the sub-surface coordinates such
> that the surface "surrounds" the sub-surface (the sub-surface
> coordinates are "inside" the surface coordinates leaving a small amount
> of "surface" on each side of the "sub-surface").
>
> Clarice Bleil de Souza wrote:
>
> > Hi everybody
> >
> > I am trying to insert 2 external non-glazed doors into my model and
> > keep getting the following error message:
> >
> > " ************* ===== Recurring Surface Error Summary =====
> > ************* The following surface error messages occurred.
> > *************
> > ************* Base Surface does not surround subsurface errors
> occuring...
> > ************* Check that the SurfaceGeometry object is expressing the
> > proper starting corner and direction [CounterClockwise/Clockwise]
> > *************
> > ** Warning ** Base surface does not surround subsurface (CHKSBS),
> > Overlap Status=No-Overlap
> > ** ~~~ ** The base surround errors occurred 2 times.
> > ** ~~~ ** Surface "OBJ:0318" misses SubSurface "SUBOBJ:0088"
> > ** ~~~ ** Surface "OBJ:0318" misses SubSurface "SUBOBJ:0092"
> > *************
> > ** ~~~ ** The base surround errors occurred 2 times (total)."
> >
> > I check the input file and everything seems to be ok. Can anybody give
> > me a hand to figure out what is going on?
> >
> > Thanks in advance,
> >
> > Clarice
> >
> >
> > ---------------------------------
> > Novidade no Yahoo! Mail: receba alertas de novas mensagens no seu
> > celular. Registre seu aparelho agora!
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> --
> Richard A. Raustad
> Senior Research Engineer
> Florida Solar Energy Center
> University of Central Florida
> 1679 Clearlake Road
> Cocoa, FL 32922-5703
> Phone: (321) 638-1454
> Fax: (321) 638-1439 or 1010
> Visit our web site at: http://www.fsec.ucf.edu <http://www.fsec.ucf.edu>
>
> UCF - From Promise to Prominence: Celebrating 40 Years
>
> [Non-text portions of this message have been removed]
>
>
> ---------------------------------
> Yahoo! Search
> Música para ver e ouvir: You're Beautiful, do James Blunt
>
> [Non-text portions of this message have been removed]
>
>
--
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL 32922-5703
Phone: (321) 638-1454
Fax: (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu
UCF - From Promise to Prominence: Celebrating 40 Years
[Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/XISQkA/lOaOAA/yQLSAA/dkFolB/TM
--------------------------------------------------------------------~->
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/