[EnergyPlus_Support] Something about the water heater: mixed

["energypluser" <energypluser@xxxxxxxxxxxx>]

Dear all

I am using a water heater to recover the heat from an IC engine. In the winter, the water 
heater will supply hot water to the fan coil unit for heating.
But I want the heater to supply domestic water during the summer rather than supply hot 
water to the fan coil unit. How can set up the water heater for the purpose?
Since the I/O reference says that only the stand-alone mode of the heater can supply the 
domestic water, how can I make the heater use the exhausted heat from the engine?
Thank you in advance.

mac.cz





The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/