[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Ground Temperature Calculation

Michael,
thanks. I saw the same issue in a couple of italian .stat files I checked last week.
I thought about two alternatives so far : or to use the .epw file of Geneve, even if it's not an accurate solution, or to try to convert other weather data formats into .epw through the energyplus weather converter. Do you know if there are any alterntive weather data format availabIe in the net I can download? I found .bin files on the DOE2 website , but I cannot convert them with energyplus weather converter.
--Davide
-----------------------------------------
Davide Dell'Oro, MSc MEng
Ph.D. student researcher

Politecnico di Milano - Department B.E.S.T.   
Via Ponzio, 31/a - 20133 Milano - Italy
Cell. +39 3403007874 
e-mail: davide.delloro@xxxxxxxxx

Lawrence Berkeley National Laboratory
1 Cyclotron Road - Mail Stop 90-3111 
Berkeley, CA 94720 - U.S.A.
Cell. +1 (510) 759 6125
Fax.  +1 (510) 486 4089
e-mail: DDellOro@xxxxxxx




  ----- Original Message ----- 
  From: Michael J. Witte 
  To: EnergyPlus_Support@xxxxxxxxxxxxxxx 
  Sent: Monday, October 09, 2006 1:10 PM
  Subject: Re: [EnergyPlus_Support] Ground Temperature Calculation


  I see the problem. In the statistics file (.stat) for ITA_Milano-Linate_IGDG, 
  the values for monthly average Global Horizontal solar (search the file for 
  "Global Avg") are NA. This is OK for EnergyPlus, because it uses the direct 
  and diffuse solar components. But the Slab preprocessor (and I would guess the 
  Basement one as well) are apparently using the Global Horizontal solar values 
  which are not present in some (or all?) of the IGDG epw files. So, for now, 
  you will have to find a different format weather file for a similar climate to 
  use with the slab program.

  I will ask if these can be reprocessed to fill in the global horizontal data 
  using the direct and diffuse data.

  Mike

  On 7 Oct 2006 at 19:32, davidedelloro wrote:

  > Dear all,
  > I am building an energyplus model for a low-rise building located in
  > Milan. 
  > I am using the RunSlab batch file placed inside the PreProcessor
  > folder (GrndTempCalc) for calculating the monthly ground temperature.
  > When I used the weather files ITA_Milano-Linate_IGDG,
  > ITA_Milano-Malpensa_IGDG and ITA_Milan_IWEC .epw the program run
  > without showing any error (from the .GER file: Program
  > Version,GroundTempCalc - Slab, Version .6, GroundTempCalc Completed
  > Successfully-- 0 Warning; 0 Severe Errors; Elapsed Time=00hr 00min
  > 18sec) but the .GTP file doesn't report any correct temperature
  > values, showing instead the "N" value in every column.
  > To be sure it was not caused by my incorrect .idf input file, I run
  > the simulation with the ITA_Genova_IWEC, SVN_Ljubljana_IWEC,
  > CHE_Geneva_IWEC and DKN_Copenhagen_IWEC .epw files and I succeeded in
  > obtaining temperature forecasts.
  > I also run the SlubExample with the USA_IL_Chicago-OHare_TMY2 and
  > ITA_Milano-Linate_IGDG .epw files and I obtained the same results: the
  > TMY2.epw file run correctly, the IGDG.epw didn't, displaying again
  > columns with "N" value in the .GTP file.
  > I also tryed IGDG and IWEC.epw files fo several other italian cities
  > and I obtained the same "N" value.
  > I would like to know if other users found this problem and what is the
  > best way to proceed.
  > Thanks
  > --Davide
  > 
  > 
  > 
  > 
  > 
  > 
  > The primary EnergyPlus web site is found at:
  > http://www.energyplus.gov
  > 
  > The group web site is:
  > http://groups.yahoo.com/group/EnergyPlus_Support/
  > 
  > Attachments are not allowed -- please post any files to the appropriate folder
  > in the Files area of the Support Web Site.
  > 
  > EnergyPlus Documentation is searchable. Open EPlusMainMenu.idf and press the
  > "search" button.
  > 
  > Yahoo! Groups Links
  > 
  > 
  > 
  > 
  > 
  > 
  > 
  > 

  ========================================================
  Michael J. Witte, GARD Analytics, Inc.
  EnergyPlus Testing and Support 
  EnergyPlus-Support@xxxxxxxx



   

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://standraise.corp.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://standraise.corp.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/