[EnergyPlus_Support] infiltration and natural ventilation

["Aslihan Tavil" <tavil@xxxxxxxxxx>]

Dear all,

I am trying to simulate a 5 storey high residential building which is 
surrounded by buildings. I want to consider the effect of heat loss 
for providing adequate ventilation for contaminant dilution in each 
zone. I wonder which value of design volume flow rate (m3/s) is 
approppriate for modeling the infiltration and natural ventilation in 
a residential unit. 
Thanks in advance

Aslihan Tavil







The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/