[EnergyPlus_Support] Order of layers in an interzone surface

["Vishal Garg" <gargvishal@xxxxxxxxx>]

Dear All,

I am trying to figure out what is the order of layers in an Interzone 
surface. Do we have to do one of the following:
1. Make a symmetric construction
2. The other zone surface must have the same number of layers and 
be "reverse" of the first

In the 1st case as the surface is symmetric, there is no problem. What 
happens in the 2nd case? What is the final order of layers in such an 
interzone surface?

Thanks and regards,

Vishal Garg 



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/