[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Atria in E+ and DesignBuilder



I hope there's someone who works with DesignBuilder so
I can have an answer to my question. As you know,
DBuilder adds E+ to run simulations of the areas
graphically described with the interface of the
program. In the example files, there's one of an
atrium in a building. The question is: Is it solving
for the parameters (temperature, humidity, etc) of the
whole building? Actually I think so, because there's a
unique group of graphics, I mean that clicking on the
diferent zones of the building in the results analysis
tab the graphics don't change. 
I hope someone can help me. The forum of DBuilder
could be an option but it is only for those who have a
licensed version of the program; I hope one of you
has, because not me. 
Thanks a lot. 


 
____________________________________________________________________________________
Looking for earth-friendly autos? 
Browse Top Cars by "Green Rating" at Yahoo! Autos' Green Center.
http://autos.yahoo.com/green_center/


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.idf and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/