RE: [EnergyPlus_Support] Water-to-Air Heatpump and Humidity Control

["Kevin J. Kyte" <kkyte@xxxxxxxxxxxxxxx>]

I am modeling a GSHP that complements a boiler in which the hot water loop
goes to heating coils in a make-up air unit.
I have been trying to model this in equest/doe 2.2 and I understand several
complications result from this scenario.

Can energyplus simulate such a situation?  Also, I will need to include
solar water heating into the system.  I know doe 2.2
does not compute solar water heating, can energyplus simulate solar heating
water into the loop too?

I am thankful for any assistance.

Kevin J. Kyte
Junior Mechanical Engineer
T.  717.636.1800
F.  716.636.1856




[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/