[EnergyPlus_Support] Unentered Other Zone Surface

["aboyemeplus" <Merid.Aboye@xxxxxxxxxxxxxx>]

If "UnenteredOtherZoneSurface" is selected as the Outside Face 
Environment for a particular surface, will the program determine the 
proper area from the corresponding surface of the specified ZONE, or 
should the user make sure that the specified ZONE has a surface with 
equal area as the subject surface?

If the ZONE specified as containing the "UnenteredOtherZoneSurface" 
has a surface with a different material than the subject surface, how 
does E+ define the interzone material? 

Thank you in advance for your support.

Merid  



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/