Re: [EnergyPlus_Support] One Wall Surface coupled with Several Surfaces

["Miguel Angel Pascual" <mapascual@xxxxxxxxx>]

You should define one wall in contact with the corridor for each office. 

---
Miguel Angel Pascual Buisan


-----Original Message-----
From: "Jose Benitez" <joseb@xxxxxxxxxxxx>
Date: Wed, 02 May 2007 19:53:27 
To:EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] One Wall Surface coupled with Several Surfaces

Hi, I am doing a simulation that includes a corridor (a zone) that is
 the outside surface zone for several offices (each one a different
 zone). Do I need to fragment my corridor wall so it coincides with the
 offices walls (so surfaces on the offices correspond to surfaces on
 the corridor)? or Can I define the surfaces in the offices with the
 wall on the corridor as their outside zone and jsut define one wall on
 the corridor with "unenteredOtherZoneSurface"?
 
 
   

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/