[EnergyPlus_Support] forrtl: Error (65): floating invalid

["asheaffe" <sheaffer@xxxxxxx>]

To all,

I am working with a model that seems to work as an idf, but not as an 
imf.  When I run the file as an imf, the simulation shuts down, with 
no warnings.  If I pause the simulation right after it goes into shut 
down, the first line that comes up after "Initializing New Environment 
Parameters" is:

forrtl: Error (65): floating invalid

The macro that I run with the imf works for other imfs, but not this 
one.  I have posted the files under A2+_16 in the problems submittals 
file.  

Andrew



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/