[EnergyPlus_Support] report variable: surface conduction

["Ery Djunaedy" <ery@xxxxxxxxxxxx>]

All,

I want to have the peak load components report a la eQuest, ie:
- overall heat transfer through window
- overall heat transfer through opaque surfaces
- people gains
- lights gains
- equipment
- infiltration
- ventilation

What variables are relevant for that? I looked at the
StandardReport.idf in DataSets folder, but in the peak cooling
components, the first two of the above list is not reported.

For window heat transfer, I use these two variables:
Zone Window Heat Gain
Zone Window Heat Loss

What about the heat transfer through opaque surfaces? Is this where
the "Zone Opaque Surface Inside Face Conduction Gain" would be
relevant? I want to double check about this because the I/O Reference
is full of warning about using this variable.

Thanks,

Ery


The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/