[EnergyPlus_Support] Re: What is wrong with my daylighting simulation result?

["mingming_zuo" <mingming_zuo@xxxxxxxxx>]

I have checked the dxf file,as you said,there are no sensor points 
within the zone!I also checked x value and y value of these points in 
the idf file. The relative cordinate values are within the room range.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Drury.Crawley@... wrote:
>
> Look at the DXF.  The sensor points should be small circles.
> Are they in the space?  That sounds like the problem.
>




The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/