[EnergyPlus_Support] Temperature control in conditioned space?

["love9787m" <love9787m@xxxxxxxxxxx>]

Hi, Mike

Currently, simulating the model that two zones are served DAOS and 
packaged terminal heat pump instead of fancoil.
At the report, as outdoor DB would be increased, the space temperature 
also increased. but shift of temperature is just 1~2 ¡ÆC from morning 
to night except design day. 
By the way, I wonder if the temperature of space is unchanged and fixed.
I've entered schedules of cooling and zone control. Is this possible 
the temperature of conditioned space is unchaged like MRT=24¡ÆC from 
morning to night in energyplus and  if it can be allowed, What should I 
do?

Thank you in advance.
regards
Ha 



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/