[EnergyPlus_Support] A Question about FAN COIL UNIT:4PIPE and COIL:water:cooling

[Àî ×¼ <lizhun99@xxxxxxxxxxxx>]

Dear EnergyPlus Support Team:
   I am simulating a building with fancoil as its air conditioning
system.My IDF is just like the example file FanCoilAutoSize.
   I found that the temperature of water outlet nodes of the coils 
( Objects of COIL:water:cooling)  is just as high as the coils outlet 
air temperature.That inconsistent with the actual situation.There 
should be a diference in temperature between the coil water outlet 
nodes and the coil air outlet nodes.
   Is that a characteristic of Coil:water:simple,the heat trasnfer is 
plentitude and temperatures of the air and water outlet nodes are very 
close ? 
   Thank you for your help. 



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/