[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] An error when applied the UCSD Displacement Ventilation Module

Dear all,

I modeled one floor of a building with displacement ventilation builidng. I used the UCSD Displacement ventilation module in my simulaiton model. Then I got the  following warnings and error.

"Warning ** Calculated Relative Humidity out of range (PsyRhFnTdbWPb)
   **   ~~~   **  Occurrence info=CALGARY INT'L AB CAN WYEC2-B-25110 WMO#=718770, 01/02 05:00 - 05:10
   **   ~~~   **  Dry-Bulb= -333.04 Humidity Ratio= 1.000E-005 Calculated Relative Humidity (fraction)= 844.67
   **   ~~~   ** Relative Humidity being reset to 1.0
....

Severe  ** Temperature out of bounds (219.18) for surface=SUBOBJ:0468
   **   ~~~   ** in Zone=Z106
   **   ~~~   **  Occurrence info=CALGARY INT'L AB CAN WYEC2-B-25110 WMO#=718770, 01/02 05:05 - 05:06
   **   ~~~   ** A temperature out of bounds problem can be caused by several things.  The user
   **   ~~~   ** should check the weather environment, the level of internal gains with respect
   **   ~~~   ** to the zone, and the thermal properties of their materials among other things.
   **   ~~~   ** A common cause is a building with no thermal mass -- all materials with
   **   ~~~   ** Regular-R definitions."

But I did not use reguar-r for building materials and construciton. In addition, the model without the UCSD DV module has not problem.

Does someone has the same experiences before and can tell me how to resolve this issue?

Thanks a lot in advance.

Regards,

David


       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.

[Non-text portions of this message have been removed]



The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/