[EnergyPlus_Support] RoomAir model

["anarui.oliveira" <anarui.oliveira@xxxxxxxxx>]

Hello, All.

When modelling zones with a useful height of 5m or 6m (or higher), 
the "Well mixed" room air model is still an acceptable approximation?

The "Displacement ventilation" model shouldn't be used if insufflated 
air is not introduced at approximately ground level?

If using "Displacement ventilation" model, are there any intervals (too 
high or too low) of the calculated transition height that indicate that 
this model is not appropriate for the current situation? Similarly, is 
there any relation between the height of temperature sensors and 
transition height that makes this model inadequate?

Thanks in advance,
Ana Rui.


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/