[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] WINDOWS 6 import procedure



It's my understanding that the Windows 6 file is 
the same (for EnergyPlus purposes) as the Window5 
file so use the Construction from Window5 to import.

EnergyPlus tells you what it's going to do, 
whether it uses the original IDF file dimensions 
or uses the ones from Window5.  To be sure, look 
at the Surface Details report.  The one in the 
HTML summary -- I think had some problems in 2.1 version which are fixed in 2.2

Linda


At 08:16 AM 3/31/2008, Nuno Costa Brandão wrote:
>I´m using "Windows 6 research version" to import a triple low-e
>glazing for my simulation. I´m not using its shading import
>capabilities, I´m only importing the glazing system. I´m a little bit
>unsure about the EnergyPlus calculations using the dat file from
>"Window 6".


[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/