Re: [EnergyPlus_Support] fullexteriorand interior

[neslihan turkmenoglu <neslihanturkmenoglu@xxxxxxxxx>]

I checked for all the hours. They are all zero.
I will upload my file for you to check.
Thank you very much


--- Rob Hitchcock <RJHitchcock@xxxxxxx> wrote:

> "Opaque Surface Inside Face Beam Solar Absorbed"
> should be non-zero on 
> both floors and walls when you have set Solar
> Distribution to 
> FullInteriorAndExterior.  Make sure you are looking
> at hours of the day 
> during which beam solar through exterior windows can
> directly reach 
> interior surfaces other than the floor.  As of
> Version 2.1 you can also 
> use "Initial Transmitted Diffuse Solar Absorbed on
> Inside of Surface" to 
> track diffuse solar transmitted through windows that
> is initially 
> absorbed by interior surfaces.  The term "initial"
> is used here since 
> additional diffuse radiation (e.g., from lights and
> from 
> interreflections) may ultimately be absorbed by
> interior surfaces.  It 
> is not currently possible to separately track window
> transmitted diffuse 
> and beam solar ultimately absorbed by all surfaces
> since reflections and 
> other sources (e.g., lights) contribute to the total
> absorbed radiation.
> 
> Rob
> =======
> neslihan turkmenoglu wrote:
> 
> >
> > 1-why isn't there any direct or diffuse radiation
> > acting on my interior surfaces except floor?
> >
> >
> > --- Fred Buhl <wfbuhl@xxxxxxx
> <mailto:wfbuhl%40lbl.gov>> wrote:
> >
> > > I believe "beam" always means direct only in the
> > > EnergyPlus context.
> > >
> > > Fred Buhl
> > >
> > > neslihanturkmenoglu wrote:
> > > > hi I have confusion about beam solar
> radiation.
> > > Does it mean the otal
> > > > of direct and diffuse solar radiation?
> > > >
> > > > I used FullExteriorandInterior option to
> consider
> > > sunlit areas on
> > > > interior walls. I get 0 values for back and
> left
> > > walls in Beam solar
> > > > intensity from exterior window on inside of
> > > surface and Beam solar
> > > > amount from exterior window on inside of
> surface'
> > > reports. And for
> > > > floor it gives the total area when I divide
> these
> > > report values. In my
> > > > other shading analysis work in morning hours
> > > sunlit areas occur on left
> > > > wall.If Shaded areas get diffuse radiation and
> > > sunlit areas get
> > > > diffuse+ direct radiation, does it mean that
> the
> > > floor gets all the
> > > > solar radiation on itself?
> > > >
> > > > thank you very much.
> > > > I uploaded my csv file
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > The primary EnergyPlus web site is found at:
> > > > http://www.energyplus.gov
> <http://www.energyplus.gov>
> > > >
> > > > The group web site is:
> > > >
> http://groups.yahoo.com/group/EnergyPlus_Support/ 
> >
> <http://groups.yahoo.com/group/EnergyPlus_Support/>
> > > >
> > > > Attachments are not allowed -- please post any
> > > files to the appropriate folder in the Files
> area of
> > > the Support Web Site.
> > > >
> > > > EnergyPlus Documentation is searchable. Open
> > > EPlusMainMenu.pdf under the Documentation link
> and
> > > press the "search" button.
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
>
__________________________________________________________
> > No Cost - Get a month of Blockbuster Total Access
> now. Sweet deal for 
> > Yahoo! users and friends.
> > http://tc.deals.yahoo.com/tc/blockbuster/text1.com
> 
> >
> <http://tc.deals.yahoo.com/tc/blockbuster/text1.com>
> >
> >  
> 
> 
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 



      ____________________________________________________________________________________
Like movies? Here's a limited-time offer: Blockbuster Total Access for one month at no cost. 
http://tc.deals.yahoo.com/tc/blockbuster/text4.com

------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/