[EnergyPlus_Support] Setpoint not met during night cycle

["JV Dirkes II" <jvd2pe@xxxxxxx>]

Dear EPlus Forum,

Please help me determine why my model maintains proper setpoints
during Winter Design Days in the "night" period, but fails to do so on
other winter days.

During the night, the setpoints are as expected, the system cycles on
and off as expected (I'm using a SYSTEM AVAILABILITY MANAGER:NIGHT
CYCLE), but the zone temp is much lower than the setpoint (including
the thermostat on/off tolerance).

I'll upload the file....


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/