[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Node Grid setting with the CondFD solution algorithm



Hello EPlus users,

My question is the next. When I used the condFD solution algorithm,(for 
example to model a PCM wallboard) I have the possibilitie of obtaining 
the temperatures of the surface and internal nodes, but I don't 
understand how has the grid been set, that's: how many nodes, where are 
situated in the wall,etc.

I revised the paper: "Advanced zone simulation in EnergyPlus: 
Incorporation of variable properties and phase change material (PCM) 
capability" where this objet is explained, but I don't find an answer 
for my question.

Thanks anticipated for your collaboration

Álvaro Campos





------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/