[EnergyPlus_Support] UFAD

[Judith Peters <jdth_peters@xxxxxxxxx>]

Dear Support Group;
   
  I am getting unusual results in a design day calculatin using the UFAD Exterior Zone Model.  The program indicates that the room condition are achieving displacement ventilation (its not mixing), yet the occupied zone is warmer than the upper mixed zone by 1-2 degrees C.  
   
  Using similar inputs (loads, supply air temps, etc.) in the UCDV model, my results are logical.  Any suggestions?   I am using "autosize" to size the diffusers in the UFAD model.  
   
  Thank you for your assistance.
   
  Judy Peters 

       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.

[Non-text portions of this message have been removed]


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/