[EnergyPlus_Support] Radiant System Surface Group

["Elreq" <tolteca33@xxxxxxxxx>]

Hello E+. I have a question regarding the low temp radiant system:
constant flow. We are simulating a 20 floor building and we want to
have radiant floors, we wanted to create a surface group that included
all the floors  (all floors are merged to one same zone of same
activity), but I see that the maximum number of surfaces that I can
put in the rad. system surface group is 10. My idea was to create two
rad. system objects and then have two different rad. system surface
groups, but I want that all the radiant floors systems act in parallel. 
Any suggestions or ideas? Is there a way to increase the number of
surfaces in the rad. system surface group?

Many thanks,
Santiago R.


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/