[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] error in running my simulation
Hello,
I am modeling an industrial bakery using DesignBuilder and I tried
running a simulation of the facility. However, when I ran it, it gave
me an error message. To see if it would work in E+, I then converted
the file to an idf file and exported it to E+. When I ran the
simulation it gave me the same error message. It gave me a few
warnings but one severe message. They are as follows
Program Version,EnergyPlus 2.1.0.023, 5/14/2008 12:34 PM,IDD_Version
2.1.0.023
************* Beginning Zone Sizing Calculations
** Warning ** GetGroundTemps: Some values for "GroundTemperatures"
fall outside the range of 15-25C.
** ~~~ ** These values may be inappropriate. Please consult
the Input Output Reference for more details.
** Warning ** GetHTSubSurfaceData: A Multiplier > 1.0 for
window/glass door W_839_5_0_0_0_0
** ~~~ ** in conjunction with SolarDistribution = FullExterior
or FullInteriorExterior
** ~~~ ** can cause inaccurate shadowing on the window and/or
** ~~~ ** inaccurate interior solar distribution from the
window.
************* Beginning System Sizing Calculations
************* Testing Individual Branch Integrity
************* All Branches passed integrity testing
************* Testing Individual Supply Air Path Integrity
************* All Supply Air Paths passed integrity testing
************* Testing Individual Return Air Path Integrity
************* All Return Air Paths passed integrity testing
************* No node connection errors were found.
** Warning ** Temperature out of range [-100. to 200.]
(PsyPsatFnTemp)
** ~~~ ** CorrectZoneHumRat Occurrence info=MONTGOMERY AL USA
TMY2-13895 WMO#=722260, 01/02 08:30 - 08:45
** ~~~ ** Input Temperature=200.38
** Warning ** Temperature out of range [-100. to 200.]
(PsyPsatFnTemp)
** ~~~ ** CorrectZoneAirTemp Occurrence info=MONTGOMERY AL
USA TMY2-13895 WMO#=722260, 01/02 08:30 - 08:45
** ~~~ ** Input Temperature=200.38
** Warning ** Temperature out of range [-100. to 200.]
(PsyPsatFnTemp)
** ~~~ ** CorrectZoneHumRat Occurrence info=MONTGOMERY AL USA
TMY2-13895 WMO#=722260, 01/02 08:30 - 08:38
** ~~~ ** Input Temperature=200.15
** Warning ** Temperature out of range [-100. to 200.]
(PsyPsatFnTemp)
** ~~~ ** CorrectZoneAirTemp Occurrence info=MONTGOMERY AL
USA TMY2-13895 WMO#=722260, 01/02 08:30 - 08:38
** ~~~ ** Input Temperature=200.15
** Warning ** Temperature out of range [-100. to 200.]
(PsyPsatFnTemp)
** ~~~ ** CorrectZoneHumRat Occurrence info=MONTGOMERY AL USA
TMY2-13895 WMO#=722260, 01/02 08:34 - 08:35
** ~~~ ** Input Temperature=200.05
** Warning ** Temperature out of range [-100. to 200.]
(PsyPsatFnTemp)
** ~~~ ** CorrectZoneAirTemp Occurrence info=MONTGOMERY AL
USA TMY2-13895 WMO#=722260, 01/02 08:34 - 08:35
** ~~~ ** Input Temperature=200.05
** Warning ** Inside surface heat balance did not converge with
Max Temp Difference [C] =1.345E-002 vs Max Allowed Temp Diff [C]
=2.000E-003
** ~~~ ** Occurrence info=MONTGOMERY AL USA TMY2-13895
WMO#=722260, 01/02 10:15 - 10:16
** Warning ** Inside surface heat balance did not converge with
Max Temp Difference [C] =8.411E-002 vs Max Allowed Temp Diff [C]
=2.000E-003
** ~~~ ** Occurrence info=MONTGOMERY AL USA TMY2-13895
WMO#=722260, 01/02 10:30 - 10:31
** Warning ** Inside surface heat balance did not converge with
Max Temp Difference [C] =0.433 vs Max Allowed Temp Diff [C] =2.000E-
003
** ~~~ ** Occurrence info=MONTGOMERY AL USA TMY2-13895
WMO#=722260, 01/02 10:45 - 10:46
** Warning ** Inside surface heat balance did not converge with
Max Temp Difference [C] =0.556 vs Max Allowed Temp Diff [C] =2.000E-
003
** ~~~ ** Occurrence info=MONTGOMERY AL USA TMY2-13895
WMO#=722260, 01/02 11:00 - 11:01
** Warning ** Inside surface heat balance did not converge with
Max Temp Difference [C] =2.557 vs Max Allowed Temp Diff [C] =2.000E-
003
** ~~~ ** Occurrence info=MONTGOMERY AL USA TMY2-13895
WMO#=722260, 01/02 11:15 - 11:16
** Warning ** Inside surface heat balance did not converge with
Max Temp Difference [C] =302.128 vs Max Allowed Temp Diff [C] =2.000E-
003
** ~~~ ** Occurrence info=MONTGOMERY AL USA TMY2-13895
WMO#=722260, 01/02 11:30 - 11:31
** Severe ** Temperature out of bounds (-261.73) for
surface=S_826_0_0_0
** ~~~ ** in Zone=826
** ~~~ ** Occurrence info=MONTGOMERY AL USA TMY2-13895
WMO#=722260, 01/02 11:45 - 11:46
** ~~~ ** A temperature out of bounds problem can be caused by
several things. The user
** ~~~ ** should check the weather environment, the level of
internal gains with respect
** ~~~ ** to the zone, and the thermal properties of their
materials among other things.
** ~~~ ** A common cause is a building with no thermal mass --
all materials with
** ~~~ ** Regular-R definitions.
** Fatal ** EnergyPlus has exited due to the reason stated above
...Summary of Errors that led to program termination:
..... Reference severe error count=1
..... Last severe error=Temperature out of bounds (-261.73) for
surface=S_826_0_0_0
************* EnergyPlus Terminated--Fatal Error Detected. 14
Warning; 1 Severe Errors; Elapsed Time=00hr 00min 7.14sec
I uploaded my idf file into problem submittal folder under the files.
The file name is bakery.idf. Any help would be appreciated. Thank you
in advance.
Dimos
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/