[EnergyPlus_Support] Multiple Blinds / Shades for a window?

["ebshen1" <ebshen1@xxxxxxxxx>]

Is it possible to have multiple blinds or shades for the same window, 
each with a different control type?  Just for sake of illustration, for 
the same window I might want to have an exterior shade, an interior 
shade, and an interior blind under different controls.  How would this 
be done?

It seems to me in Surface:HeatTransfer:Sub the window surface is 
defined, but you can only reference one shading control.  Then in 
WindowShadingControl you reference the construction but you can only 
choose one shading control type.  It seems like you could specify 
multiple layers of blinds / shades in the construction, but you cannot 
assign a shading control type for each layer???


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/