[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Pump Power calculations



Dear E+ Forum,

For ASHRAE 90.1 baseline models, a pump is limited to a specific unit
power (e.g., 22W / gpm for chilled water pumps).  I want to autosize
the pumps, but use a Delta P and motor efficiency that will always
result in the desired unit power.  My derivation of that Delta P value
does NOT result in the power level that I expect when I run E+. So,
either my derivation is incorrect, or E+ calculates the power in a
different manner.
Will someone direct me to the E+ power formula for situations when the
pump is autosized?  I must be missing something, but cannot find it in
"Help".  Thanks!


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/