[EnergyPlus_Support] chiller inlet evaporate water temperature is as high as 20degree centigrade?

["lichunying83" <lichunying83@xxxxxxxxx>]

Hello, I have encountered a problem.

I have set the outlet water temperature of my evaporate loop to be 
7.22, and the loop delta T is 6.67 as default. 

However, in the result, the 7.22 degree centigrade is well met. But the 
inlet water temperature is as high as 20degree centigrade. 

Has anyone encountered this problem before? Thank you for any advice!

By the way, I use autosize in most of the places. But the capacity of 
chiller is given by me, since I am using two chillers. But I am sure 
the capacity is enough for the system.


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/