[EnergyPlus_Support] error: diagram pieces not linked

["thaisarquiteta" <thaisaya17@xxxxxxxxxxx>]

Dear all,

I'm using the E+ v2.2, and I'm having trouble in HVAC diagram execution 
when working with compact HVAC.
During execution the following error occurs: 
error: diagram pieces not linked (upstream): number zone piu fan
Although it apparently does not affect the results of the simulation, 
it  takes a long time to execute the file.
Any help will be appreciated.
Thanks a lot,
Thais Aya H.Inatomi



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/