[EnergyPlus_Support] need help with steam loop

["ellinas.1984" <ellinas.1984@xxxxxxxxx>]

I was wondering if anyone could help me out with a problem I am having. 
I am trying to create a steam loop but am having a problem connecting 
it properly. I have defined the condensate pump, the steam boiler, the 
steam to air heating coil, steam pipes, and branches. However, when I 
run the simulation it failed on me. I don't quite understand what it 
means or how to go about fixing. If anyone has an idea on how I can fix 
this problem, it would be greatly appreciated. I am uploading my idf 
file. 

Thanks in advance,
Dimos


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/