[EnergyPlus_Support] Central Heat Production vs terminal units

["anarui.oliveira" <anarui.oliveira@xxxxxxxxx>]

Hi everyone.

I modelled a system with a central Heat pump (air-to-water), producing 
heat for a hot water loop serving 3 Air Treatment Units and some 
terminal unit ventilators, but the thermal heating rate/energy produced 
by the central heat pump is much (2-3 times) higher than the sum of the 
heating rates/energy of all the coils in the ATUs and terminal units...
It seems as if the control os this central unit is not performing 
properly, but I can't figure out why...

Could anyone help?

Thanks in advance,
Ana Rui.


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/