I tried to create the dxf file from the EP-Lunch, I usually do this__._,_.___
to check geometry.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...>
wrote:
>
> You are trying to create it with WinEPDraw? And
> that is how you are getting the error message?
>
> (This was my question -- what software on the
> EnergyPlus side are you using to try to create it)
> Or is it from EP-Launch?
>
> Linda
>
> At 04:27 AM 9/3/2008, Andrés Montero wrote:
> >The idf file has been uploaded, the name is M8 3.50-5.20A.idf
> >
> >thanks
> >
> >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Andrés Montero
> ><amontero75@> wrote:
> > >
> > > I have AutoCad as a dfx viewer, and I don't get a dxf file
since it
> > > can't be created when I try to creat ir.
> > > I will try to upload de idf file to the gruop in order to get
help.
> > > You can try erasing the HeatTransferSub and you'll see the dxf
will
> > > be created without any problem, I got the error when I add a
window.
> > >
> > > thanks
> > >
> > >
> > > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@>
> > > wrote:
> > > >
> > > > What software are you getting that error message from?
> > > >
> > > > It might be good to send your DXF file along with
> > > > this description to energyplus-support@
> > > >
> > > > This forum is only user to user now.
> > > >
> > > > Linda
> > > >
> > > > At 07:35 AM 9/2/2008, Andrés Montero wrote:
> > > > >The error was: Create Drawing files from IDF has detected a
> > > problem.
> > > > >
> > > > >What would happen if walls and windows have the same
thickness?.
> > > In a
> > > > >greenhouse walls are made of plastic and in order to
simulate in
> > > > >EnergyPlus I have to enter walls and windows with the same
> > > > >properties. When I try to create a DFX file (I haven't try
yet
> >to
> > > > >simulate, just to be sure the geometry is correct) with just
> >walls
> > > I
> > > > >don't get any problem. When I enter windows, then I get the
> >error
> > > of
> > > > >creating a drawing file.
> > > > >
> > > > >I hope you can help me
> > > > >
> > > > >Thanks
> > > > >
> > > > >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie
<linda@>
> > > > >wrote:
> > > > > >
> > > > > > The drawing does not include thickness, only
> > > > > > geometry. What was the error message?
> > > > > >
> > > > > > Linda
> > > > > >
> > > > > > At 06:02 AM 8/29/2008, Andrés Montero wrote:
> > > > > > >Does anyone know the minimum thickness for
Material:Regular
> >and
> > > > > > >Material:WindowGlass?
> > > > > > >
> > > > > > >I'm trying to simulate a greenhouse and I'm using walls
and
> > > windows
> > > > > > >mede of a plastic material (and of course, the thickness
is
> > > very
> > > > >small)
> > > > > > >and when I try to generate the drawing I got an error
> >message.
> > > > > > >
> > > > > > >Thanks
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >------------------------------------
> > > > >
> > > > >The primary EnergyPlus web site is found at:
> > > > > http://www.energyplus.gov
> > > > >
> > > > >The group web site is:
> > > > > http://groups.yahoo.com/group/EnergyPlus_Support/
> > > > >
> > > > >Attachments are not allowed -- please post any
> > > > >files to the appropriate folder in the Files area of the
Support
> > > Web Site.
> > > > >
> > > > >EnergyPlus Documentation is searchable. Open
> > > > >EPlusMainMenu.pdf under the Documentation link and press
> > > the "search" button.
> > > > >Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> >
> >
> >------------------------------------
> >
> >The primary EnergyPlus web site is found at:
> > http://www.energyplus.gov
> >
> >The group web site is:
> > http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> >Attachments are not allowed -- please post any
> >files to the appropriate folder in the Files area of the Support
Web Site.
> >
> >EnergyPlus Documentation is searchable. Open
> >EPlusMainMenu.pdf under the Documentation link and press
the "search" button.
> >Yahoo! Groups Links
> >
> >
> >
>
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/