[EnergyPlus_Support] Re: heat pump in compact hvac hot water loop

["Ana Rui Oliveira" <anarui.oliveira@xxxxxxxxx>]

You can create a base system with Compact HVAC: Plant: Boiler, and 
then pick up the expanded idf file and substitute the boiler by a 
Heat Pump:Water Heater with a Water Heater:Mixed, connecting the use 
side nodes to the same inlets/outlets that were used by the boiler... 
but it all takes a bit of "manual" work, because branches, nodes,  
equipment lists an dthe like must be adapted accordingly.

Good luck,
Ana Rui.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Horta Pedro <pedrorta@...> 
wrote:
>
> dear all,
> 
> is there way to define an heat pump instead of a boiler for heat 
production in compact hvac systems?
> 
> thank you in advance
> 
> pedro
>



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/