[EnergyPlus_Support] about multi-story

["llyymmff" <liyuemingff@xxxxxxx>]

Dear all
I have some question when I set up a IDF of building with multi-story. 
If I set the some parameter for the zone in middle floors, I am not 
very sure which number I need to input. For example, when I input the 
parameters in the field of "ventilation", my middle floors are 8, and 
design volume flow rate in each zone is 0.2 m3/s(one floor has one 
zone). So shall I input 0.2 or 1.6 ( 0.2*8 ) m3/s for the zone? 
Could you please tell me? Thank you very much!

Lym 


------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/