[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: air to water heat pump



yes. I am working in Shanghai. I will be very glad to discuss with you about the problems in E+ simulation. you can contact me by e-mail or phone. my mobile phone is 13301856961.
 
Regards.
----------------------------------------------
Yiqun Pan  (Ph.D., Professor)
Vice Director
Sino-German College of Applied Sciences (CDHAW)
Tongji University
4800 Cao An Highway, Shanghai, China  (201804)
Tel: 86 21 69584741
Fax: 86 21 69589621
E-mail:  yiqunpan@xxxxxxxxxxxxxxxxxx 
-----------------------------------------------

发件人: aymericnovel
发送时间: 2008-10-24 10:52:49
收件人: EnergyPlus_Support@xxxxxxxxxxxxxxx
抄送:
主题: [EnergyPlus_Support] Re: air to water heat pump
 

Indeed, I had the same concern recently. Use the heat pump water
heater component along with water tank:mixed (to connect condenser to
water loop, DX:Coil:heatpumpwaterheater and a Fan:OnOff. That makes 4
object to use.

Still, there is a limitation for that: If the air entering the
evaporator is below 5?, the heat pump stops. In China, they do use
these heat pumps for lower temperature even if COP is bad, that is a
problem I could not avoid and if anyone has an idea, he/she is
welcome to propose!

Mr Yiqun Pan, you are working in Shanghai? I am in Beijing and I
would be glad to discuss with you about models of EPlus that we
should work on according to simulation use in China

Best Regards
Aymeric

--- In EnergyPlus_Support@yahoogroups.com, "Griffith, Brent"
<brent_griffith@...> wrote:
>
> There is a heat pump water heater component that can be used with
> hydronic heat.
>
>
>
>
>
> ________________________________
>
> From: EnergyPlus_Support@yahoogroups.com
> [mailto:EnergyPlus_Support@yahoogroups.com] On Behalf Of Yiqun Pan
> Sent: Wednesday, October 22, 2008 10:44 PM
> To: EnergyPlus_Support@yahoogroups.com
> Subject: [EnergyPlus_Support] air to water heat pump
>
>
>
> How can we simulate air to water heat pump with EnergyPlus? There
are
> water to water heat pump, water to air heat pump, air to air heat
pump,
> but no air to water heat pump in E+. But air to water heat pump is
a
> very popular cooling and heating source equipment around the area
of
> Shanghai, China. Is there any other ways to simulate this system
with
> E+?
>

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___