[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Heat Pump Modelling
Thanks guys for helping with the excel sheet for estimating
parameters.
Any clues on the methodology of estimating these parameters from the
catalog data? May be researchers from OSU can answer this.
Regards,
Saqib
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...>
wrote:
>
> The spreadsheets are available in the Yahoo Groups files.
>
> The input files are included with the EnergyPlus installation.
>
> At 09:28 AM 12/12/2008, Edwin Lee wrote:
> >Saqib:
> >
> >I will let you know when they are available.
> >
> >Thanks,
> >Edwin
> >
> >On Fri, Dec 12, 2008 at 10:24 AM, Saqib Javed
> ><<mailto:mjav6012@...>mjav6012@...> wrote:
> >
> >Edwin,
> >
> >Can you send both fow water to water and air to
> >water HPs? Are there seperate excel sheets for
> >reciprocating and scroll compressors, as I
> >believe the required parameters for these two
> >compressor types are different. If yes then I am
> >interested in both compressor types.
> >
> >Thanks and Best Regards,
> >
> >Saqib
> >
> >
> >From: Edwin Lee <<mailto:leeed2001@...>leeed2001@...>
> >
> >To:
>
><mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx>EnergyPlus_Support@yahoogr
oups.com
> >Sent: Friday, December 12, 2008 5:14:17 PM
> >
> >Subject: Re: [EnergyPlus_Support] Heat Pump Modelling
> >
> >Saqib:
> >
> >The parameter estimation procedure involves a
> >simulation of the heat pump. A spreadsheet
> >(Excel) tool was available from the Oklahoma
> >State University website, but has been removed
> >(I believe it was left behind during a website
> >update). A new tool is currently under
> >development which is not spreadsheet based, but
> >a standalone program. I will look into getting
> >a copy of the spreadsheet tool put back online
> >until this new tool is available. For
> >reference, will you be using Water to Air or Water to Water heat
pumps?
> >
> >Jay:
> >
> >There are a few example files which use these
> >parameter estimation heat pump models.
> >
> >Water to Air:
> >5ZoneWaterLoopHeatP ump.idf
> >5ZoneWLHPPlantLoopT ower.idf
> >HeatPumpWaterToAir. idf
> >HeatPumpWaterToAirW ithAntifreezeAnd LatentModel. idf
> >HeatPumpWaterToAirW ithAntifreezeAnd LatentModel. idf
> >
> >Water to Water:
> >GSHP-GLHE.idf
> >PlateHeatExchanger. idf
> >
> >Edwin
> >
> >On Fri, Dec 12, 2008 at 9:36 AM, Saqib Javed
> ><<mailto:mjav6012@...>mjav6012@yahoo. com> wrote:
> >
> >Dear Sankar,
> >
> >Actually I have conatcted Jin regarding the
> >parameter estimation procedure. Please do
> >explain how to estimate the parameters from the
> >catalog dat. Please send the idf as I donät have it.
> >
> > Regards,
> >
> >Saqib Javed.
> >
> >
> >PhD Candidate,
> >Building Services Engineering,
> >Department of Energy and Environment,
> >Chalmers University of Technology,
> >SE-412 96 GOTHENBURG.
> >
> >
> >Tel. 031-772 11 55
> >Fax. 031-772 11 52
> >e-mail: <mailto:saqib.javed@...>saqib.javed@ chalmers. se
> >
> >
> >
> >From: Sankar Padhmanabhan
> ><<mailto:sankar.padhmanabhan@...>sankar.padhmanabhan @okstate. edu>
> >To:
> >"<mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx>EnergyPlus_Support@
> >yahoogroups. com"
> ><<mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx>EnergyPlus_Support@
> >yahoogroups. com>
> >Sent: Friday, December 12, 2008 4:26:01 PM
> >
> >Subject: Re: [EnergyPlus_ Support] Heat Pump Modelling
> >
> >Hi Saqib,
> >The model is called HEATPUMP:WatertoWat er(or
> >watertoair): ParameterEstimat ion. Since you mentioned you are
familiar
> >with the model, I assume you know how to derive the parameters for
the
> >model.
> >
> >Thanks
> >Sankar
> >
> >mjav6012 wrote:
> > >
> > > Hi All,
> > >
> > > I know the heat pump model developed by Hui Jin and Spitler (at
> > > Oklahoma University) has been implemented in Enegyplus but cant
really
> > > find it. Any help in this regards will be appreciated.
> > >
> > > Regards,
> > >
> > > Saqib
> > >
> > >
> >
> >--
> >Sankar Padhmanabhan
> >Graduate Research Assistant
> >Ph.D Student
> >Mechanical & Aerospace Engg
> >Oklahoma State University,
> >Stillwater, OK-74078
> >Ph:405-744-2410 (O)
> >
> >
> >
> >
> >
> >
>
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/