RE: [EnergyPlus_Support] Building self-shading

Please ignore my previous question … seems the answer was staring me in the face.

Please contact us further if you require any additional information or assistance.

Best regards,
Brian Aldred
Software Developer

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Brian
Sent: 24 December 2008 10:08
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Building self-shading

I currently have a requirement to simulate a particular building
modelled so as not shade itself even though it's geometry would
normally mean it would.

Is there any way to turn off the self-shading at the building level,
or is there some other method I can use? I've looked in the reference
manual with no success, so my next port of call is here.

Thanks in advance.

__._,_.___

The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___