[EnergyPlus_Support] Re: Pump and fan efficiencies

["JV Dirkes II" <jvd2pe@xxxxxxx>]

Did my post of earlier today not answer your question?  If it did not, please clarify your question a bit.  Thanks!

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, L Herrmann <l.herrmann@...> wrote:
>
> 
> 
> I was wondering about how to adjust pump and fan efficiencies in EP.  For example, to change the efficiency of the pump motor, would one need to create an entirely new pump with a higher efficiency- which meets the flow rate and head for the system? 
>  
> Thanks
>




------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/