[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: How to simulate building model without the influence of Radiation
If there are windows in the building, will you still have internal heat gain inside the structure?
-ted
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Rongxin Yin <rongxinyin@...> wrote:
>
> Got it, Thanks a lot.
>
> Rongxin
> ________________________________
> From: Edwin Lee <leeed2001@...>
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Sent: Tuesday, May 12, 2009 2:07:05 PM
> Subject: Re: [EnergyPlus_Support] How to simulate building model without the influence of Radiation
>
> On each building surface, just change it to neglect solar radiation. The seventh field is the sun exposure, so change it from: SunExposed (or blank) to NoSun. This should 'turn off the sun' for that surface.
>
> Edwin
>
> On Tue, May 12, 2009 at 1:12 PM, Rongxin Yin <rongxinyin@yahoo. com> wrote:
>
> Hi guys,
>
> I'd like to conduct simulation on several control strategies, while i want to get a constant outside weather condition without the influence of sun radiation. I check the variable parameters in *.epw file and find the following three variable parameters "Horizontal Infrared Radiation Intensity, Direct Normal Radiation, Diffuse Horizontal Radiation" used in the calculation. Here it is: If i set these values into "0", could the load calculation omit the influence of "Radiation"?
> If not, are there other methods to achieve it?
>
> Best Regards,
>
> Rongxin
>
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/