[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] How to do a single heating hidronic simulation



I have some troubles to do a water loop with a convective radiator. I don't any cooling system. I only want to now the consumption of a boiler. 

So, from the beginning, what i need to do this??

Here is the scheme: http://img32.imageshack.us/img32/8223/circuitoc.jpg

It is very simple. But doesn't work and I can't control this. 

It is necessary do a AirLoop? 

I belive that the ZoneHVAC:Baseboard:RadiantConvective:Water doesn't work with a boiler. The examples only uses fan coils. But i don't want that. I just want a simple hot water loop for heating.

Thanks. 



------------------------------------

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/