Re: [EnergyPlus_Support] bizarre error

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

It may be a round off problem.

You can probably ignore it (it does not stop the program, does it?) but
I'd appreciate it if you sent the input file to me or to
energyplus-support@xxxxxxxx



EnergyPlus Development Team
At 12:54 PM 6/26/2009, Dave Bosworth wrote:
> I am getting a seemingly bizarre
> error:
>
>    ** Severe  ** GetSurfaces: Outward facing angle [0.0]
> of subsurface="S_123" significantly different than
>    **   ~~~   ** ..facing angle [360.0] of
> base surface=S_178 Tilt=90.0
>    **   ~~~   ** ..surface class of base
> surface=Wall
>
> How can facing angle of 0 degrees be very different than a facing angle
> of 360 degrees?  Anyone seen this
> before?

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___