Re: [EnergyPlus_Support] Add a basement

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

what did you set as your ground temperatures.

to be safe set the outside boundary condition of the floor as
"adiabatic" -- while this says there is no heat transfer to the
ground, there will also be no confusion of heat transfer FROM the
ground.

At 11:30 AM 7/2/2009, v s wrote:
> The problem i had and drive me
> to the solution of "basement"
> was that when the floor had NO insulation, i needed 500Kwh for
> heating.
> When i added 3mm insulation, i needed 2500Kwh for heating.
>
> Is this logical?
> (warm climate)

__._,_.___

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___