[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Add a basement?
what ground temperatures do you use?
It's better to calculate them with "slab" auxilliary program.
it results to totally different loads, than using gr. temp from the weather file.
just a last tip.
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, v s <vs114@...> wrote:
>
> In the beggining there was no basement.
> The climate is warm, so both heat and cool have almost the same importance.
> Without any insulation for the floor and having 20cm isulation for the rest dwelling, i get 1500 kwh/year for heat
> and 650 kwh/year for cooling.
> With 10cm insulation at the floor (on the ground) and everything else the same, i get 150 kwh for heat and 3700 for cooling.
> I' ve tried the ground temperature and the outside boundary condition set to surface but i get almost the same results.
> Any idea?
> If i add a basement, will this help the enormous cooling needs?
>
> Thank you all.
> Vaggelis.
>
>
> ________________________________
> From: YuanLu å??å? Li <yli006@...>
> To: Linda <energyplus_support@xxxxxxxxxxxxxxx>
> Sent: Friday, July 3, 2009 12:56:31 AM
> Subject: RE: [EnergyPlus_Support] Add a basement
>
>
>
>
>
> I wonder where you added the floor insulation.
>
> The basement is being heated by the ground below.
>
> If you insulated the basement floor, you have lost the ground heating.
>
> If you have a walk out basement, make sure to insurate the exposed basement wall to R12 or more. Ground temperature is generally warmer than the outdoor exposed temperature. Ice is a good insulator at the groun durface.
>
> Normal basement wall in Canada is insulated. at least, to one meter below the ground level, to R8 or more. Water mains are buried two meters below ground, and will not freeze in Winter, even when the outdoor temperature is at -18 degree C.
>
>
> Dr. Li
>
> ________________________________
> To: EnergyPlus_Support@ yahoogroups. com
> From: vs114@yahoo. com
> Date: Thu, 2 Jul 2009 10:30:43 -0700
> Subject: Re: [EnergyPlus_ Support] Add a basement
>
>
>
>
>
> The problem i had and drive me to the solution of "basement"
> was that when the floor had NO insulation, i needed 500Kwh for heating.
> When i added 3mm insulation, i needed 2500Kwh for heating.
>
> Is this logical?
> (warm climate)
>
>
>
>
>
> ________________________________
> From: Linda Lawrie <linda@fortlawrie. com>
> To: EnergyPlus_Support@ yahoogroups. com
> Sent: Thursday, July 2, 2009 8:18:24 PM
> Subject: Re: [EnergyPlus_ Support] Add a basement
>
>
> A "walk out basement" might be below grade on one or more walls. There will be a warning message that it can't do the height specific calculations it uses on surfaces/walls. The warning can be ignored.
>
>
> At 11:09 AM 7/2/2009, v s wrote:
>
> My outside boundary conditions for the basement is ground.
> >What is the "warning messages on a walk out basement"?
> >Will i have any other problems?
>
>
>
> ________________________________
> Internet Explorer 8 makes surfing easier. Get it now!
>
------------------------------------
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
mailto:EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/