Dear
Francois,
You'll
have to do a little reading of the documentation to determine the proper
Output:Variable to use, but it should be a simple matter to add those lines to
your .idf and re-run the file.
p.s.,
If you also use the line Output:VariableDictionary, IDF; Energy Plus will give a
complete list of allowable variables (for your specific .idf) in the .rdd output
file
The Building Performance
Team
James V. Dirkes II,
P.E., LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616
450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of greenbuild15
Sent: Monday, July 20, 2009 2:56 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Additional Data OutputDear EnergyPlus Team and users,
I am using DesignBuilder as interface to EnergyPlus. In addition to the energy use of pumps and fans that DesignBuilder reports, I would like to have hourly data on pump and fan flow rates. Would it be possible to edit the in.idf file that DesignBuilder has created to generate such data?
I will appreciate your help. Thanks in advance !
Francois
__._,_.___
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___